Application Instructions for Patches

Note: Launder garment before applying patches.

  1. Preheat iron to highest heat setting, also set iron to the no steam setting.
  2. Place garment on a hard surface and heat the garment where the patch is to be applied. Do not use an ironing board as it is difficult to obtain the appropriate pressure when using an ironing board. We recommend placing a towel between the garment and the hard surface.
  3. Place patch, adhesive side down, on garment where patch is to be applied.
  4. Place iron on top of patch and hold in place for 5 sec pressing firmly. Then move the iron back and forth across the label for an additional 1-2 minutes. Press firmly during the entire application process and be sure to seal the edges of the patch. (Note: larger patches sizes may require longer times).
  5. If necessary, repeat step 4 (Note: it is recommended that step 4 be repeated for the denim patches).
  6. Allow patch to cool before handling.

The Great Label Store is not responsible for damage to garments resulting from failure to apply labels or patches according to these instructions.

Print Page | Close Window